4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33027
(Revision Date: Aug. 24, 2011)
4.10 UHF RFID KIT (B-EX700-RFID-U2-US/EU/CN-R)
2. Pass the Antenna Cable through the Bush.
Bush
Antenna Cable
3. Pull out the Antenna Cable from the opposite side, and pass it through the opening.
Antenna Cable
Opening
4. Connect the Antenna Cable to the RFID Module, as shown below.
Antenna Cable
RFID Module
5. Attach the two Module Attachment Plates with the PT-3x6 screws.
Module Attachment Plate
PT-3x6
PT-3x6
Module Attachment Plate
4-56