Toshiba B-EX4 Maintenance Manual page 20

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
5. Put the Cord Bush onto the Harness Ass'y in the orientation as shown below.
Harness Ass'y
6. Connect the Harness Ass'y to CN1 on the Cutter I/F PC Board.
Harness Ass'y
7. Place the hook at the left side of the Cutter Unit on the cut in the printer main frame.
Hook
Cut
4- 5
EO18-33027
(Revision Date: Aug. 24, 2011)
4.1 DISC CUTTER (B-EX204-QM-R)
Cord Bush
Cord Bush
Cutter I/F PC Board
CN1
Cutter Unit