Toshiba B-EX4 Maintenance Manual page 43

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4. While holding the half opened Top Cover, release the hooks of the Operation Panel Ass'y and remove it
from the printer.
5. Disconnect the operation panel harness from the Operation Panel Ass'y.
Operation Panel Harness
4.4.2 Installing the Solenoid
1. Place the Head Up Link Plate onto the Head Up Shaft, as shown below.
Align the screw holes, then secure the Head Up Link Plate with the M-3x6 screw.
Head Up Arm
Head Up Shaft
Head Up Link Plate
Hook
Operation
Panel Ass'y
M-3x6 Screw
4-28
(Revision Date: Aug. 24, 2011)
4.4 RIBBON SAVING MODULE (B-EX904-R-QM-R)
Top Cover
EO18-33027
"H-shape" cut