User System Mode; System Mode; Download Mode; Auto Configuration Mode - Toshiba B-EX4T1 Series Owner's Manual

2.PRINTER SETUP

2.6.5 USER SYSTEM MODE

The user system mode is accessible from the online mode. This mode contains parameters and
settings which might be frequently changed by users (administrator) or service persons.
In addition to the functions of parameter setting and fine adjustment (in common with the System
Mode), there are the following additional features, issue condition display function, manual threshold
setting, and system tools menu.
The values set in these modes are stored in the non-volatile memory.

2.6.6 SYSTEM MODE

This mode is mainly used by service persons or the production department staff for adjustment of the
printer before shipment. System mode contains settings which should not be changed so frequently.
In addition to the parameter setting and fine adjustment menus (in common with the User System
Mode), there are sensor adjustment, interface, RFID, RTC and BASIC setting menus.
Other extended functions are self-diagnosis, test print, RAM clear (re-initialize the printer), pre- shipment
adjustments for factory use, and the menu which enables saving parameter settings, external characters,
TPCL commands to an external USB memory stick or copying data from a USB memory stick to the printer.
The values set in this mode are stored in the non-volatile memory.

2.6.7 DOWNLOAD MODE

This mode is used to download boot and main programs.

2.6.8 AUTO CONFIGURATION MODE

In this mode, the printer firmware is automatically updated with the program stored in a USB
memory stick.
21