Toshiba B-EX4 Maintenance Manual page 21

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33027
(Revision Date: Aug. 24, 2011)
4.1 DISC CUTTER (B-EX204-QM-R)
8. Secure the bottom of the Cutter Unit with the two M-4x6 screws.
Cutter Unit
M-4x6 Screw
9. Secure the side of the Cutter Unit with the FL-3x6 screw.
FL-3x6 Screw
10. Insert the connector of the Harness Ass'y into the hole in the Main Frame, then fit the Cord Bush into
the hole.
Main Frame
Hole
Harness Ass'y
Cord Bush
4- 6