4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4. Fully open the Top Cover.
5. Release the tab on the right end by pushing it, then remove the Front Panel.
Front Panel
4.1.2 Mounting the Cutter Unit
1. Turn the Head Lever to FREE position and open the Ribbon Shaft Holder Plate.
Head Lever
Top Cover
Tab
4- 3
EO18-33027
(Revision Date: Aug. 24, 2011)
4.1 DISC CUTTER (B-EX204-QM-R)
Ribbon Shaft
Holder Plate