Toshiba B-EX4 Maintenance Manual page 140

5. SYSTEM MODE
English
「COMPLETED Turn off the printer」 is displayed after finishing Ram clear. Turn off printer
5.8.3 Parameter clear / PARAMETER CLEAR
It clears each parameters of printer setting.
The destination for which RAM clear has been performed is printed on the top right corner of the
maintenance counter printout.
English
The setting value for each destination is below.
System mode
Parameter setting/printer movement setting
Media Load
Forward wait
Auto forward/reverse wait fine adjustment
value
Wait movement
HU CUT/RWD.
Ribbon save
Pre peel-off process
Back feed
Function
Clearing
After clear
Clearing
After clear
QM
OFF
OFF
0.0mm
MODE1
OFF
TAG
OFF
STD
5-58
EO18-33027
5.8 RAM CLEAR
CN JA
← ←
← ←
← ←
← ←
← ←
← ←
← ←
← ←