Toshiba B-EX4 Maintenance Manual page 70

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
7. Fasten the lower part of the Earth Plate to the Platen Holder Frame with the screw securing the Platen
Holder Frame.
Platen Holder Frame
8. Secure the Antenna Ass'y to the Earth Plate with the SMW-3x6 screw.
4.10.4 Attaching the RFID Module
1. Fit the Bush into the hole as shown in the picture below.
When viewed from the printer front side.
4-55
(Revision Date: Aug. 24, 2011)
4.10 UHF RFID KIT (B-EX700-RFID-U2-US/EU/CN-R)
Earth Plate
SMW-3x6
Bush
EO18-33027