Chapter 3 Procedures Before Operation - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

3
PROCEDURES BEFORE OPERATION
This chapter describes the procedures before operation.
1.
Checking the temperature control module specifications
Check the temperature control module specifications. (Page 16 SPECIFICATIONS)
2.
Mounting the temperature control module
Mount the temperature control module to the FX5 CPU module. For details, refer to the following.
MELSEC iQ-F FX5U User's Manual (Hardware)
MELSEC iQ-F FX5UC User's Manual (Hardware)
3.
Wiring
Wire the external devices to the temperature control module.
4.
Adding modules
Add temperature controllers to the module configuration using GX Works3.
When adding a temperature control module, FX3 allocation mode is usable if a module with the suffix
"(FX3)"after its name is selected.
• FX5-4LC: Normal mode
• FX5-4LC (FX3): FX3 allocation mode
5.
Parameter settings
Set the temperature control module parameters using GX Works3.
6.
Implementing auto tuning
If implementing auto tuning, set PID using the auto tuning function.
7.
Programming
Create the program.
8.
Warm-up operations
Implement warm-up for approx. 30 mins. before starting operations.
3 PROCEDURES BEFORE OPERATION
3
21