CH1 Alert set value 3
Set the temperature to turn ON CH1 alert 3 (Un\G401, b10) according to the selected alert 3 'alert mode' (Un\G533).
For 'CH1 Warning Occurrence Contents' (Un\G401), refer to the following.
Page 128 CH1 Alert definition
For details of the alert function, refer to the following.
Page 54 Alert Function
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
CH Alert set value 3
CH Alert set value 3 (If using FX3 allocation mode)
■Alert mode
Set the alert mode of Alert 3 in the following buffer memory area. The alert mode of Alert 3 corresponds to 'CH1 Alert set
value 3' (Un\G436).
• 'CH1 Alert 3 mode setting' (Un\G535)
■Setting range
For the settings range, refer to the following.
Page 137 Setting range
■Setting unit
For the settings unit, refer to the following.
Page 138 Setting unit
■Default value
The default value is 0.
CH1 Alert set value 4
Set the temperature to turn ON CH1 alert 4 (Un\G401, b11) according to the selected alert 4 'alert mode' (Un\G533).
For 'CH1 Warning Occurrence Contents' (Un\G401), refer to the following.
Page 128 CH1 Alert definition
For details of the alert function, refer to the following.
Page 54 Alert Function
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
CH Alert set value 4
CH Alert set value 4 (If using FX3 allocation mode)
■Alert mode
Set the alert mode of Alert 4 in the following buffer memory area. The alert mode of alert 4 corresponds to 'CH1 alert set value
4' (Un\G437).
• 'CH1 Alert 4 mode setting' (Un\G536)
■Setting range
For the settings range, refer to the following.
Page 137 Setting range
■Setting unit
For the setting unit, refer to the following.
Page 138 Setting unit
■Default value
The default value is 0.
CH1
CH2
436
636
51
91
CH1
CH2
437
637
52
92
Appendix 4 Buffer Memory Areas
CH3
CH4
836
1036
131
171
CH3
CH4
837
1037
132
172
APPX
139
A