Heating-Cooling Pid Control - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

Heating-cooling PID control

System configuration
A system configuration example is described below.
(1) CPU module (FX5U CPU module)
(2) Temperature control module (FX5-4LC)
Parameter settings
Connect GX Works3 to the CPU module to set the parameters.
In the program example, default parameters are used for the parameters that have not been set. For the
parameters, refer to the following.
Page 77 PARAMETER SETTING
■Setting modules
For the module setting method, refer to the following.
Page 82 Setting modules
(1) (2)
8 PROGRAMMING
8.1 Programming Procedure
8
87