Connecting a cable
■When ferrules with insulation sleeve are used
Insert a wire with the ferrule with insulation sleeve into the wire insertion opening and push the wire.
■When stranded wires and solid wires are used
Push the open/close button of the terminal block with a flathead screwdriver. While pushing the open/close button, insert the
wire into the insertion opening until the wire reaches the back, and then release the open/close button.
<Reference>
Manufacturer
PHOENIX CONTACT GmbH & Co. KG
Precautions
Then, pull the wire lightly and check that it is clamped securely.
Disconnecting a cable
Push the open/close button of the wire to be disconnected with a flathead screwdriver. Pull out the wire with the open/close
button pushed.
Model
SZS 0.4×2.5 VDE
6.1 Spring Clamp Terminal Block
6
6 WIRING
71