Fx3 Allocation Mode Function - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

4.37

FX3 Allocation Mode Function

The temperature control module buffer memory addresses can be arranged in the same way as for FX3U-4LC.
Sequence programs proven with the FX3U-4LC can be used.
Operation
In FX3 allocation mode, broad program corrections are not required during FX3 program appropriation as the buffer memory
allocations are the same as for FX3U-4LC.
Further, in FX3 allocation mode, the temperature adjustment settings can be set from the parameters.
Setting method
Configure the settings as described below.
1.
When adding a new module, select a module whose name has "(FX3)" after its module model name.
[Navigation]  [Parameter]  [Module Information]  Right-click  [Add New Module]
2.
Set parameters in the same way as in normal mode.
3.
Write the parameters to the module, and then either reset or turn OFF→ON the power supply.
• It is not possible to switch between normal mode and FX3 allocation mode during operations.
• "Temperature control trace" in the module tools is not compatible with FX3 allocation mode.
4 FUNCTION
68
4.37 FX3 Allocation Mode Function