Functionality; Function Block; Signals; Settings - ABB REG650 Technical Manual

Section 16
Station communication
16.8.2
16.8.3
16.8.4
16.8.5
Table 480: GOOSESPRCV Non group settings (basic)
Name
Operation
16.8.6
608

Functionality

GOOSESPRCV is used to receive a single point value using IEC61850 protocol via
GOOSE.

Function block

GOOSESPRCV
BLOCK
DATAVALID
COMMVALID
IEC10000248-1-en.vsd
IEC10000248 V1 EN
Figure 293: GOOSESPRCV function block

Signals

Table 478: GOOSESPRCV Input signals
Name
BLOCK
Table 479: GOOSESPRCV Output signals
Name
SPOUT
DATAVALID
COMMVALID
TEST

Settings

Values (Range) Unit
Off -
On

Operation principle

The DATAVALID output will be HIGH if the incoming message is with valid data.
The COMMVALID output will become LOW when the sending IED is under total
failure condition and the GOOSE transmission from the sending IED does not happen.
The TEST output will go HIGH if the sending IED is in test mode.
^SPOUT
TEST
Type Default Description
BOOLEAN 0
Type Description
BOOLEAN
BOOLEAN
BOOLEAN
BOOLEAN
Step Default
- Off
1MRK 502 048-UEN A
Block of function
Single point output
Data valid for single point output
Communication valid for single point output
Test output
Description
Operation Off/On
Technical manual