Displaying Configuration And Information; Set Language; Display The Battery Type - Dräger Oxylog 2000 plu Instructions For Use Manual

Displaying configuration and information

– The settings made via the "Configuration" are
retained after the ventilator is switched OFF.
– Configuration can be cancelled by pressing the
Alarm reset key or by startup of ventilation.
The following settings can be made for the applica-
tion concerned via Configuration and informa-
tion:
– Language
The following ventilator data can be displayed via
Configuration and information:
– Identification No. (Device-ID)
– Total hours of operation (Working hours)
– Hours of operation since the last inspection and
maintenance (Hours since service time)
– Battery type and battery capacity.
3 Select and confirm Configuration and infor-
mation.

Set language

1 Press the key Settings
menu Configuration and information
2 Select and activate the line Language.
Instructions for Use Oxylog 2000 plus SW 1.n
3 Select the language and confirm.

Display the battery type

to select the
.
1/2
The new language selected is effective
immediately.
Press the key Settings
menu Configuration and information
The performance data of the inserted battery
are displayed on the device.
Configuration
to select the
2/2
.
71