Table of Contents
Advertisement
Operation
Calibration
The pressure and flow sensors are automatically
calibrated by the device at regular intervals without
interrupting ventilation.
Screen brightness
The screen brightness levels can be set on the last
page of the Settings menu, from level 1/4 to 4/4:
– The setting Brightness
mains and battery operation when adjusting the
settings on the ventilator.
Volume loudness
The volume loudness level can be set on the last
page of the Alarms menu, from level 1/4 to 4/4.
56
The saved calibration values are retained even
when the device is switched OFF.
– The setting Brightness
is active in both
battery operation, when no controls have been
set for a period longer than one minute.
Instructions for Use Oxylog 2000 plus SW 1.n
is active during
- Quick Links:
- Problem Solving
Hide quick links:
Advertisement
Chapters
Table of Contents
