Displaying Configuration And Information; Set Language; Set Gas Supply - Dräger Oxylog 3000 Instructions For Use Manual

Displaying configuration and information

– The settings made via the "Configuration" are
retained after the ventilator is switched OFF.
– Configuration can be cancelled by pressing the
Alarm reset key or by startup of ventilation.
The following settings can be made for the applica-
tion concerned via Configuration and informa-
tion:
– Language
– Gas supply (O or medical air)
2
The following ventilator data can be displayed via
Configuration and information:
– Identification No. (Device-ID)
– Total hours of operation (Working hours)
– Hours of operation since the last inspection and
maintenance (Hours since service time)
– Battery type and battery capacity.
Instructions for Use Oxylog 3000 SW 1.n

Set language

1 Press the key Settings
menu Configuration
2 Select and activate the line Language.
3 Select the language and confirm.
The new language selected is effective
immediately.

Set gas supply

Press the key Settings
menu Configuration and information
Select and activate line Gas supply
O or medical air can be set.
2
Set and confirm the required gas supply.
Configuration
to select the
.
1/2
to select the
1/2
77
.