Overview; Safety Messages - Emerson Rosemount 2051 Reference Manual

Reference Manual
00809-0300-4101, Rev BB
Section 6
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 51
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 51
Service support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 52
Diagnostics identification and recommended action . . . . . . . . . . . . . . . . . . . . . . . . . . page 52
PlantWeb™ and NE107 diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 55
Alert messages and fail safe type selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 56
Disassembly procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 57
Reassembly procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 58
6.1

Overview

This section contains information on how to troubleshoot the Rosemount
Transmitter with PROFIBUS
6.2

Safety messages

Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that raises potential safety
issues is indicated by a warning symbol (
performing an operation preceded by this symbol.
Explosions could result in death or serious injury.
Installation of this transmitter in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Review the
approvals section of this Reference Manual for any restrictions associated with a safe
installation.
In an Explosion-Proof/Flameproof installation, do not remove the transmitter covers

when power is applied to the unit.
Process leaks may cause harm or result in death.
Install and tighten process connectors before applying pressure.

Electrical shock can result in death or serious injury.
Avoid contact with the leads and terminals. High voltage that may be present on leads

can cause electrical shock.
Troubleshooting
Troubleshooting
®
PA Protocol.
). Refer to the following safety messages before
Troubleshooting
November 2016
™
2051 Pressure
51