Overview; Safety Messages - Emerson Rosemount 648 Reference Manual

Reference Manual
00809-0200-4648, Rev BB
Section 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
Sensor connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Bench top configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Basic setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Remove power module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25
2.1

Overview

This section contains information on configuration and verification that should be
performed prior to installation. Field Communicator and AMS
instructions are given to perform configuration functions. For convenience, Field
Communicator Fast Key sequences are labeled "Fast Keys" for each software function below
the appropriate headings.
Sensor input trim example
Fast Keys sequence
2.2

Safety messages

Instructions and procedures in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that potentially raises safety
issues is indicated by a warning symbol ( ). Refer to the following safety messages before
performing an operation preceded by this symbol.
Failure to follow these installation guidelines could result in death or serious
injury.
Make sure only qualified personnel perform the installation.

Explosions could result in death or serious injury.
Installation of this transmitter in an explosive environment must be in accordance with
the appropriate local, national, and international standards, codes, and practices.
Review the approvals section of the Rosemount
Transmitter Reference Manual for any restrictions associated with a safe installation.
Before connecting a Field Communicator in an explosive atmosphere, ensure the

instruments are installed in accordance with intrinsically safe or non-incendive
field wiring practices.
Process leaks may cause harm or result in death.
Install and tighten process connectors before applying pressure.

Configuration
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configuration
1, 2, 3, etc.
Configuration
™
Device Manager
™
648 Wireless Temperature
July 2016
3