Table 22: Ac Power Cord Specifications - Juniper QFX5200 Hardware Manual

QFX5200 Switch Hardware Guide

Table 22: AC Power Cord Specifications

Country/Region Electrical Specifications
Australia 250 VAC, 10 A, 50 Hz
China 250 VAC, 10 A, 50 Hz
Europe (except Italy, 250 VAC, 10 A, 50 Hz
Switzerland, and United
Kingdom)
Italy 250 VAC, 10 A, 50 Hz
Japan 125 VAC, 12 A, 50 Hz or 60 Hz
North America 125 VAC, 13 A, 60 Hz
South Korea 250 VAC, 10 A, 60 Hz
Switzerland 250 VAC, 10 A, 50 Hz
United Kingdom 250 VAC, 10 A, 50 Hz
Related
Documentation
40
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5 meters) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the QFX
Series switches are in compliance.
Table 22 on page 40 lists AC power cord specifications provided for each country or
region.
AC Power Supply for a QFX3500, QFX3600, or QFX3600-I Device
General Safety Guidelines and Warnings on page 127
General Electrical Safety Guidelines and Warnings on page 155
Prevention of Electrostatic Discharge Damage on page 156
AC Power Supply for a QFX5100 Device
Plug Standards Juniper Model Number
AS/NZ 3109-1996 CBL-EX-PWR-C13-AU
GB 1002-1996 CBL-EX-PWR-C13-CH
CEE (7) VII CBL-EX-PWR-C13-EU
CEI 23-16/VII CBL-EX-PWR-C13-IT
JIS C8303 CBL-EX-PWR-C13-JP
CAN/CSA No. 49-92 CBL-EX-PWR-C13-US
KSC 8305; K60884-1 CBL-EX-PWR-C13-KR
SEV 1011 SEV 1991; EN CBL-EX-PWR-C13-SZ
60320 C13
BS 1363/A CBL-EX-PWR-C13-UK
Graphic
Copyright © 2017, Juniper Networks, Inc.