Removing The Converter Board - Mindray T1 Service Manual

7.4.2 Removing the Converter Board

Unscrew the six M3×6 screws that attach the converter board pressing plate and then take it out.
The ESD insulator is not
required to be removed
7.4.2.1 Removing the Converter Board PCBA
Take out the converter board PCBA cable and converter board PCBA from the top housing. Then remove the connector from
the socket of converter board PCBA.
7-14
Unscrew the six
M3×6 screws
Remove the connector
from the socket of
converter board PCBA.
T1 Service Manual