Disassembling The Right Housing Assembly - Mindray T1 Service Manual

7.4.1 Disassembling the Right Housing Assembly

Remove the four white covers over the screws, unscrew the four M3×8 screws and take out the right housing assembly.
7.4.1.1 Removing the Rotating Plate
Unscrew the four M3×8 screws and take out the right housing strengthen board. Then remove the rotating plate from the
right housing.
T1 Service Manual
Remove the four
white covers over
the screws
Unscrew the four
M3×8 screws
Unscrew the four
M3×8 screws
7-13