Mindray T1 Service Manual page 23

2.5.1.2 Multi-parameter Board
The multi-parameter board provides the following functions:

ECG and Resp measurement

SpO measurement
2

NIBP measurement

2-channel TEMP measurement

2-channel IBP measurement

Isolating the parameter modules, except NIBP, from the earth

Isolating ECG from other parameters

Analog output (one channel for ECG and two channels for IBP)

Defib sync output

Data exchange with the main board through the serial ports
2.5.1.3 Parameter Connector Board
The parameter connector board provides the following functions:

ECG signal isolation and transmission

SpO signal transmission
2

TEMP signal transmission

IBP signal transmission

Speaker transmission

Analog output transmission
2.5.1.4 Infrared Communication Backboard
The infrared communication backboard implements infrared communication and transmits signals between the
multi-parameter board and the main board.
2.5.1.5 Wi-Fi Module
The Wi-Fi module supports wireless networking that is compatible with the 802.11 a/b/g/n standard.
T1 Service Manual 2-9