T1 Docking Station And T1 Handle - Mindray T1 Service Manual

2.5.2 T1 Docking Station and T1 Handle

The figure above shows the connection and relation among T1, T1 Docking Station and T1 Handle. They can be mutually
connected through 54-pin connectors. T1 is the core of the system, while T1 Handle and T1 Docking Station provide
extension of many functions.
When T1 is used with the T1 Handle alone, it can communicate with external parameter modules, and its interaction with
external modules is realized through the T1 handle converter board and T1 handle NIOS board.
When T1 is installed to the T1 Docking Station, it is connected to the T1-Dock interface power board through the T1-Dock
converter board, thus getting power from the T1-Dock interface board. Besides, T1 can be connected with external devices
through the USB connector, external device connector (Mini DB15), VGA, and network connector on the Docking Station.
When T1, the T1 Docking Station and the T1 Handle are used together, all the functions described above are provided.
2-10 T1 Service Manual