Removing/Inserting the Battery (main battery)
Batteries must only be replaced by qualified personnel.
10
1. Turn off the MOBIC.
2. If it is connected, disconnect the power supply unit
from your MOBIC.
3. Lay the unit on its front.
4. Open the battery compartment cover by loosening
the two screws.
5. The battery is connected to the MOBIC with a plug-in
cable.
To remove or insert the battery, disconnect or con-
nect the battery cable from the MOBIC at the socket.
6. Remove or insert the battery.
7. Close the battery compartment again.
MOBIC T8
Getting Started
A5E00263242