Attaching The Power Cord Clips - Precor TRM 800 Assembling And Maintaining Manual

26

Attaching the Power Cord Clips

This treadmill includes a set of clips that hold the power cord
away from the incline lift movement and other potential
sources of wear and damage. Use these clips to secure the
power cord to the base frame beneath the hood.
Important: When attaching the power cord clips, keep users'
safety and the placement of the power cord in mind. If the power
cord runs along the length of the treadmill, use the power cord
clips to secure it to the side rail.
To attach the power cord clips:
1.
Assembling and Maintaining TRM 800-Series Treadmills
Note: Using a hex wrench, reach through the openings in
the outer sides of the hood to tighten the side screws.
Figure 11: Hood and fastener placement
Wrap the clip around the power cord near the power
switch at the front of the treadmill and clamp it shut.
Figure 12: Clip placement on power cord