Resume A Call; Switch Between Calls; End A Call; Conference Calls - Polycom RealPresence Group User Manual

Procedure
1. Tap to open the Quick Access menu, then tap
2. Tap More > Place a Call.
3. Enter a contact's number or select a contact from Contacts, Speed Dial, or Recent.

Resume a Call

When you no longer want to keep a call on hold, you can resume the held call.
Procedure
» Do one of the following:
• Tap Resume Call
• Tap to open the Quick Access menu then tap

Switch Between Calls

When you have a call on hold, you can switch between the held and active calls.
Procedure
1. Tap to open the Quick Access menu.
2. Tap More > Switch To.

End a Call

You can end a call using the RealPresence Touch.
Procedure
» To end a call, tap

Conference Calls

Conference, or multipoint, calls involve at least three different endpoints or sites. All endpoints or sites
can participate in conference calls when using a bridge, such as the RealPresence
800s, to host the conference call. The number of sites allowed in the call is determined by the capabilities
of the bridge hosting the call. Check with your system administrator to find out how many sites are
allowed in a bridged conference call.
Place a Conference Call
To start a new conference call, you need to start with the first participant or site and add other participants
after each participant answers the call.
Procedure
1. Call the first site.
2. After the call connects, tap
Call.
3. On the Place a Call screen, enter your contacts number, tap
select a contact from Contacts, Speed Dial, or Recent.
Polycom, Inc.
Hang Up.
to open the Quick Access menu then tap
Using the Touch User Interface
More > Hold.
More > Resume.
®
Collaboration Server
More >
and enter your contact's name, or
Add a
44