Using A Polycom Realpresence Group Series Remote Control - Polycom RealPresence Group User Manual

Using a Polycom RealPresence Group
Series Remote Control
Topics:
▪ Remote Control Buttons and Descriptions
▪ Recharge the Remote Control Battery
▪ Wake a RealPresence Group Series System
▪ Contacts
▪ Calling
▪ Sharing Content
▪ Recording Calls
▪ Settings
The infrared RealPresence Group Series remote control enables you to operate a RealPresence Group
Series system. This includes placing calls, adjusting the volume, controlling the camera, navigating
screens, and more. RealPresence Group Series systems and Polycom
systems have infrared receivers that enable you to control your RealPresence Group Series system by
pointing the remote control toward the system or a connected EagleEye camera or camera system.
Note: If you have an SDI camera, you might need a special cable to connect the camera to the
system to receive infrared signals from the remote control. For more information about the
cable, contact Polycom support.
Polycom, Inc.
® ™
EagleEye cameras and camera
11