Hold A Call And Answer A Call; Hold A Call And Place A Call; Switch Between Point-To-Point Calls; Resume A Call - Polycom RealPresence Group 300 User Manual

Hold a Call and Answer a Call

At times, you might need to place a call on hold and answer an incoming call.
To place a call on hold to answer a call:
» Use your remote control to select Hold + Answer.
If you want to hang up on the call that has been on hold the longest, select Hang Up + Answer.

Hold a Call and Place a Call

To make an individual outgoing call while you are on a call, you must place the active call on hold.
To make an outgoing call while a call is on hold:
» Press on the remote control.
Place the call using your preferred method.

Switch Between Point-to-Point Calls

When you have a call on hold, you can switch between the held and active call.
To switch between calls:
1 Press Menu.
2 Select Switch To.

Resume a Call

When you no longer want to keep a call on hold, you can resume the held call.
To resume a held call:
» Use your remote control to select Manage > On Hold > Resume Call.

Hang Up All Calls and Answer a Call

When Auto Answer Point-to-Point Video is set to No, you can add an incoming call to the conference.
To hang up all point-to-point active and held calls:
» Select Hang Up + Answer to hang up all active and held calls and establish a point-to-point call with
the incoming call.
Polycom, Inc. 14