Cameras - Polycom RealPresence Group User Manual

Realpresence group series
Hide thumbs Also See for RealPresence Group:
Table of Contents

Advertisement

2. Touch the RealPresence Group Series System tab.
3. Under Meetings, touch Mute Auto Answer Calls to enable the option.
4. After the call connects, touch
Temporarily Refuse Calls
If your system administrator has allowed you access to User Settings, you can set the system to Do Not
Disturb to automatically refuse incoming calls when you do not want to be disturbed. When the system
receives a call, the call is rejected, the caller gets a message that the call was rejected, and you receive
no notification about incoming calls.
You can still place outgoing calls when the system is set to Do Not Disturb.
Procedure
1. From the Home screen, touch
2. Touch the RealPresence Group Series System tab.
3. Set Auto Answer Point-to-Point or Auto Answer Multipoint Video to Do Not Disturb.

Cameras

You can adjust available cameras in several ways.
Select a Camera
You can use the Polycom Touch Control to select and adjust the main camera or other near-end or far-
end video sources.
You can adjust other auxiliary cameras or far-end cameras that support pan, tilt, and zoom movement, if
supported or enabled.
When you are in camera control mode, you can press and hold a number to save a preset.
Procedure
1. From the Call screen or from the Home screen, touch
2. Touch Select Camera, and then touch the camera or other video source you want to use.
3. In a call, touch
The video source is shown to the call participants.
Adjust Cameras
After you select a camera, you can make some adjustments to enhance the view.
Note:
Before you can adjust the EagleEye Director or EagleEye Director II camera systems, you
must turn camera tracking off.
Procedure
1. Touch
Cameras > Control Camera.
2. Touch the arrow buttons on the Polycom Touch Control to move the camera up, down, left, or
right.
3. Touch
and
Polycom, Inc.
Mute when you're ready to unmute the microphones.
.
Cameras > Near or Far to select either near-end or far-end control.
to zoom out and zoom in.
®
Using a Polycom
Touch Control Device
Cameras.
112

Advertisement

Table of Contents
loading

Table of Contents