Stop Sharing Content From A Connected Computer; Download And Install People + Content Ip - Polycom RealPresence Group User Manual

Resolution
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
Note: The way you set the resolution and refresh rate differs, depending on the type of
operating system you have. Check your computer manual or help topics for the
appropriate steps.
Procedure
1. From the Home screen or Call screen, touch Show Content.
2. Touch the video source to start showing content.
Keep the following in mind points:
• Audio from the content input is muted unless the content input is selected as a video source.
• To send analog content, disconnect both digital and analog inputs, wait 15 seconds, then
connect only the analog input.
• If both digital and analog inputs are connected, only the digital content is sent.

Stop Sharing Content from a Connected Computer

You can use the Polycom Touch Control to stop showing the content you are sharing from a computer
connected to a RealPresence Group system.
Procedure
1. From the Content screen of the Touch Control, touch the computer source to stop showing it.
2. Using your remote control, select
Laptop.

Download and Install People + Content IP

You need to download and install the People + Content IP application on a computer before you can use
it to show content.
Note: If the room system is paired with a Polycom touch device, you do not need to install the
application onto your computer. After you connect your computer to the touch device over
USB, a version of the People + Content IP application launches automatically.
Procedure
1. On a computer, visit the
2. Download the People + Content IP software for Mac or PC.
3. Open the zip file and click on the application installation.
Polycom, Inc.
Refresh rates (Hz)
60
60
60
60
> Hide and the name of your content source, such as Hide
People + Content IP page.
®
Using a Polycom Touch Control Device
106