End A Call; Conference Calls - Polycom RealPresence Group User Manual

End a Call

You can end a call using the RealPresence Touch.
Procedure
» To end a call, tap

Conference Calls

Conference, or multipoint, calls involve at least three different endpoints or sites. All endpoints or sites
can participate in conference calls when using a bridge, such as the RealPresence
800s, to host the conference call. The number of sites allowed in the call is determined by the capabilities
of the bridge hosting the call. Check with your system administrator to find out how many sites are
allowed in a bridged conference call.
Place a Conference Call from Recent Calls
You can use the Recent Calls list to include participants in a conference call.
Procedure
1. On the Home screen, tap
2. Tap More >
A check mark displays for selected contacts.
3. Repeat the above step until you have selected all of the recent contacts to add to the conference.
4. Tap .
The system dials all of the selected contacts.
Place a Conference Call from Contacts
You can call contacts to include them as participants in a conference call.
Procedure
1. On the Home screen, tap
2. Tap a contact in the contact list.
3. Continue to add additional contacts to the conference list.
4. Tap to dial all the contacts in the list.
Place a Conference Call by Adding Participants
You can add participants to a conference call.
Procedure
1. Using your preferred dialing method, call the first site.
2. To call the next site, tap
3. Call the site using your preferred calling method.
4. Repeat the above steps until all meeting participants have been added.
Polycom, Inc.
Hang Up.
Place a Call.
Add > Recent Calls, tap a recent contact in the list.
Place a Call > Contacts.
More > Add.
®
Using a Polycom RealPresence Touch
®
Collaboration Server
™
Device
71