Displaying Vectors - YOKOGAWA WT500 User Manual

6.8

Displaying Vectors

Procedure
6-20
Displaying Vectors
1.
Press OTHERS to display the Others menu.
2.
Use the cursor keys to select Vector.
3.
Press SET to confirm the selection.
Selecting Whether or Not to Display Numeric Data
4.
Press FORM to display the Vector Form menu.
5.
Use the cursor keys to select Numeric.
6.
Press SET to select ON or OFF.
Setting a Vector Zoom
7.
Use the cursor keys to select U Mag or I Mag.
• Select U Mag to zoom the vectors of the fundamental voltage signals U(1) of the
elements that subject to harmonic measurement.
• Select I Mag to zoom the vectors of the fundamental current signals I(1) of the elements
that are subject to harmonic measurement.
8.
Press SET to display the zoom factor entry box.
9.
Use the cursor keys to set the zoom factor.
10.
Press SET to confirm the selection.
IM 760201-01E