YOKOGAWA WT500 User Manual page 131

Explanation
IM 760201-01E
5.2 Displaying Numeric Data and Changing Displayed Items
Resetting the Displayed Item Order
1.
Press ITEM to display the Numeric menu.
2.
Use the cursor keys to select Reset Items Exec.
3.
Press SET. An Alert dialog box appears.
4.
Use the cursor keys to select OK or Cancel.
5.
If you select OK and press SET, the orders of the displayed items on all pages will
be reset.
If select Cancel and press
The following is an example of the numeric value display:
Displayed when the
The color changes from green to red if the input signal level
displayed item can
exceeds approximately three or six times the specified
be changed using
measurement range when the crest factor is set to 3 or 6,
the function select
respectively. The first and second lines correspond to
key. The item that
voltage and current, respectively. The conditions of the input
can be changed is
signals of elements 1 to 3 are displayed in numeric order
also highlighted.
from the left.
Data update count
• The data update count is displayed under Update in the lower left corner
of the screen.
• Press HOLD to hold the data update count.
Press HOLD again to un-hold it.
• When the value exceeds 65535, it returns to zero.
• The data update count is reset to zero if the power is turned off or
if a setting such as the measurement range or filter is changed.
SET
, the order of the displayed items will not be reset.
Page bar
The current page is
highlighted. If page scrolling
is possible using PAGE
PAGE , the top and bottom
sections of the page bar
show
is not possible,
shown.
or
/ . If page scrolling
/ is
5-5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
App
Index