YOKOGAWA WT500 User Manual page 20

IM 760201-01E
• Integration (See sections 5.6 to 5.12)
Select this item to display a menu for setting the integration mode, integration auto
calibration, the integration timer, the reservation time, the watt hour integration method
for each polarity, and the ampere hour integration mode.
• Details.../Hide Details
Select this item to switch between displaying all menu items and only displaying a
portion of the menu items.
• Measure (See sections 5.3 to 5.5 and 12.6)
Select this item to display a menu for setting master/slave synchronized measurement
and for selecting the equation for apparent/reactive power and the format for phase
difference display.
• User Function (See sections 5.13 and 5.14)
Select this item to display a menu for setting user-defined functions and the MAX hold
feature.
• Freq Items (See section 5.16)
This item only appears on models without the frequency measurement option. Select
this item to display a menu for selecting which frequencies to measure. Because
models with the frequency measurement option measure all voltages and currents,
this menu will not appear.
• Harmonics (See sections 6.3 to 6.5)
This item only appears on models with the harmonic measurement option. Select this
item to display a menu for setting the PLL source, the measured harmonic orders, and
the equation for the harmonic distortion factor, in harmonic measurement.
• Delta Measure (See section 5.17)
This item only appears on models with the delta computation option. Select this item
to display a menu for selecting the delta computation type and the voltage or current
mode that will be the object of delta computation.
Note
While displaying any submenu in the Setup menu, you can press PAGE or PAGE to display
the previous or next menu. This feature is useful when you want to check the measurement
conditions set in each menu.
SHIFT+SETUP (INPUT INFO) Key Combination
Use this key combination to display a list of the conditions for acquiring the data from
a measured voltage or current signal, such as the wiring system for each element, the
wiring unit, the measurement range, the scaling, the synchronization source, and the
input filter.
1.2 Setup Menu Display and Operation Keys
1
2
3
4
5
6
7
8
9
10
11
12
13
14
App
Index
1-5