YOKOGAWA WT500 User Manual page 89

3.14 Entering Values and Character Strings
Entering Character Strings
3-28
Units, file names, the equations for user-defined functions, and the user name and
password for the Ethernet Interface (optional) can be entered using the keyboard that
is displayed on the screen. Use the cursor keys and SET to navigate the keyboard and
enter a character string.
1.
Use the cursor keys to select a character.
2.
Press SET to enter that character into the entry box.
If there are characters already in the entry box, use the Page
select the entry position.
3.
Repeat steps 1 and 2 to enter all of the characters in the string.
4.
After entering all of the characters, select
If you enter an incorrect user-defined function, an error message appears.
Keys Other Than the Character Keys
• CAPS: Switches between uppercase and lowercase.
• SPACE: Enters a space.
• : Enters the displayed characters.
Usable Characters and Maximum String Lengths
Setting Max. Length
Equation 1 to 50 characters
Unit 1 to 8 characters
File name 1 to 8 characters
Comment 0 to 25 characters
Server name 0 to 40 characters
User name 0 to 15 characters
Password 0 to 15 characters
Note
File names are not case-sensitive. Comments are case-sensitive. The following file names
cannot be used due to MS-DOS limitations.
AUX, CON, PRN, NUL, CLOCK, COM1 to COM9, and LPT1 to LPT9
and Page
on the keyboard, and press SET.
Moves the cursor to the left.
Moves the cursor to the right.
Deletes the previous character.
Enters a character string.
Usable Characters
Spaces and all characters that are displayed on the
keyboard
Spaces and all characters that are displayed on the
keyboard
0-9, A-Z, %, _, parentheses, and minus signs
Spaces and all characters that are displayed on the
keyboard
Spaces and all characters that are displayed on the
keyboard
Spaces and all characters that are displayed on the
keyboard
Spaces and all characters that are displayed on the
keyboard
cursor keys to
IM 760201-01E