YOKOGAWA WT500 User Manual page 264

Explanation
IM 760201-01E
Selecting the Storage Medium and Directory
See "Selecting the Storage Medium and Directory" under "Explanation" in section 10.3.
Selecting Which Files to Display in the File List Dialog Box
See "Selecting Which Files to Display in the File List Dialog Box" under "Explanation" in
section 10.3.
Selecting Which Files to Delete
• A file with an asterisk next to it will be deleted when you execute the delete operation.
• There are two ways to select the files that will be deleted:
• One at a time
You can put a single asterisk next to a file by using Set/Reset.
• As a group
You can use All Set to select all of the files in the current directory. Asterisks will
appear next to the file names. Asterisks will also appear next to directory names,
but the directories will not be deleted.
Note
• Deleted data cannot be recovered. Be careful not to delete the wrong files.
• Deletion will stop if an error occurs while the WT500 is deleting files.
• Up to 1000 files and directories can be displayed in the file list. If there are more than a total
of 1000 files and directories in a given directory, the file list for that directory will only display
1000 files and directories. There is no way to set which files and directories are displayed.
• Files without archive attributes are not displayed in the File List window. Do not clear the
archive attributes of files on your PC that were saved using the WT500.
• File paths can be displayed using up to 41 characters. If a path exceeds 41 characters, an
ellipsis appears at the end of the character string.
10.6 Deleting Files
1
2
3
4
5
6
7
8
9
10
11
12
13
14
App
Index
10-21