YOKOGAWA WT500 User Manual page 257

10.4 Saving Screen Image Data
10-14
Setting the File Name
18.
Use the cursor keys to select File Name.
19.
Press SET. A keyboard appears on the screen.
20.
Use the keyboard to enter the file name.
For instructions on how to use the keyboard, see section 3.14, "Entering Values and
Character Strings."
21.
Use the cursor keys to select Auto Naming.
22.
Press SET to select ON or OFF.
23.
Press ESC to close the Screen Image Output Settings menu.
Executing or Canceling the Save Operation
Perform the following steps in the display that you want to save an image of.
Press IMAGE. Screen image data is saved to the specified path (indicated after "Path =").
If you press IMAGE again during the save operation, the operation will be cancelled. An
icon appears in the upper left of the screen during the save operation.
IM 760201-01E