YOKOGAWA WT500 User Manual page 278

11.3 Configuring TCP/IP Settings
11-10
Note
• You must restart the WT500 or execute Bind (see page 11-6 for details) to apply new TCP/IP
settings and changes.
• If the DHCP feature is enabled and you turn the WT500 on without connecting an Ethernet
cable to it, communication and file operations may not function properly. If this happens, turn
DHCP off and then restart the WT500.
Configuring the TCP/IP Settings on a PC
To connect a PC to the WT500, you must configure PC communication settings, such as the IP
address. Configure communication settings for each NIC that is installed in the PC. This section
explains the NIC settings that must be made to connect the WT500 to a PC.
You do not need to make the IP address and other settings described below if a DHCP server
automatically assigns them.
Obtain an IP address automatically
Select
Properties
dialog box.
For example, if you are connecting a PC and the WT500 through an independent Ethernet
network, enter the settings as indicated in the table below. For details about the settings,
consult your system or network administrator.
Parameter Setting
DHCP Specify an IP address
IP address Example: 192.168.211.255
Subnet mask Example: 255.255.255.0
Gateway None
DNS Disable
WINS Disable
The following procedure shows how to configure the network settings on Windows XP. On
Windows NT and 2000 Pro, carry out equivalent steps accordingly.
Start
1. On the taskbar, click
Network and Internet Connections
2. Click
Local Area Connection
3. Double-click
box appears.
Properties
4. Click . The
5. Select the TCP/IP corresponding to the Ethernet NIC that is connected to your PC, and then
Properties
click . The
under the
Note
Do not obtain an IP address automatically
(do not use DHCP)
IP address of the PC
Set to the same value as the WT500 subnet mask
Control Panel
, and then click
, and then click
Local Area Connection Status
. The
Local Area Connection Properties
Internet Protocol (TCP/IP) Properties
IP Address TCP/IP
tab of the
. The Control Panel opens.
Network Connections
dialog
dialog box appears.
dialog box appears.
IM 760201-01E
.