Displaying Vectors - YOKOGAWA WT1600 User Manual

4.4

Displaying Vectors

Keys
Procedure
Explanation
4-14
ESC
INPUT
RANGE SCALING
MOTOR SET
FILTER AVG
INTEGRATOR
START STOP
INTEG SET RESET
Check that the measurement mode is set to harmonic measurement. If the
measurement mode is set to normal measurement, set Mode to ON in the
Harmonics menu (see section 7.1).
1. Press DISPLAY to display the Display menu.
2. Press the Format soft key to display the display format selection box.
Displaying Vectors
3. Turn the jog shuttle to select Vector.
4. Press SELECT to confirm the new display format.
The phase and size (rms value) relationship between the fundamental waves U(1) and
I(1) of each element specified for harmonic measurement (see section 7.3) can be
displayed using vectors. The positive vertical axis is set to 0 (angle 0), and the vector of
each input signal is displayed.
For examples of vector displays and the procedure in changing the displayed items and
contents, see section 7.10.
«For a functional description, see section 1.8.»
DISPLAY HOLD
SINGLE
TRIG'D
WAVE
HARMONICS
CURSOR
To exit the menu during operation, press ESC.
WIRING
MEASURE
CAL
SYNC SRC
ESC
UP DATE
FILE STORE
RATE
STORE SET
REMOTE
LOCAL MISC
MAX HOLD NULL
COPY
MENU
SHIFT
IM 760101-01E