Displaying The Voltage, Current, Active Power, And Power Factor - YOKOGAWA WT5000 User Manual

3.2 Displaying the Voltage, Current, Active Power,
and Power Factor
This instrument shows on the screen the measurements (measurement functions) of the voltage and
current applied to the input elements or wiring units.
The measurements of voltage, current, active power, and power factor do not require you to set
equations. The measurements are simply shown on the screen. Using an example, this section
explains how to display measurement results numerically.
In addition, this section explains operating procedures using the following setup methods.
• Procedure Using the Setup Menu (see chapter 1)
• Procedure Using the Menu Icons (see page iii)
Measurement Display Screen (Example of a 4 items display)
Measurement display of input element 1
Voltage (true rms) measurement
If you hold your finger down on the 4-,
8-, 16-value, matrix or harmonics
display for at least 1 second, you can
perform the operations described in
"Switching the Displayed Items (Items),"
provided later.
Note
Voltage, current, active power, and power factor values can be shown graphically.
• The waveform display feature (see section 6.2) shows voltage and current waveforms.
• The trend display (see section 6.3) shows voltage, current, active power, and power factor values
graphically.
IM WT5000-02EN
► "Measurement Functions Used in Normal Measurement" in the features guide
Current (true rms) measurement
Power (active power) measurement
Power (power factor) measurement
Switches the displayed page (Page Up/Page Down)
Switches to the measurement display of another input element
Tap ▲ or ▼ to change the displayed page in order from the
current number. Tap the number directly to change to the
number display page.
3-9