Displaying The Vectors Of The Harmonics - YOKOGAWA PZ4000 User Manual

9.9

Displaying the Vectors of the Harmonics

Keys
Procedure
9-24
This section applies when the measurement mode is set to harmonic
measurement.
CONFIGURATION
SETUP INPUT MEASURE TRIGGER
E S C
DISPLAY MATH CURSOR
FILE MISC HELP
COPY NULL CAL
MENU
ELEMENTS
FILTER FILTER FILTER
1 2 3
1 3 5
CH CH CH
2 4 6
CH CH CH
• The mark indicates the keys that are used for the operation.
• To exit the menu during operation, press the ESC key.
Set the measurement mode to harmonic measurement. For the procedures, see
section 5.1, "Selecting the Measurement Mode."
1. Press the SETUP key to display the Setup menu. Confirm that [Mode] is set to
[Harmonics].
2. Press the DISPLAY key to display the Display setting menu.
3. Press the [Format] soft key to display the display format selection box.
Displaying the vectors
4. Turn the jog shuttle to select [Vector].
5. Press the SELECT key to confirm the selection.
Select whether or not to display the numerical data (ON/OFF)
6. Press the [Numeric] soft key to select [ON] or [OFF].
«For a functional description, see section 1.6.»
TRIG' D
ACQ
ZOOM
REMOTE
LOCAL
SHIFT
FILTER
SINGLE
START/STOP
START
4
ABORT
OBSERVATION TIME
7
CH VOLTAGE
8
CH
CURRENT
IM 253710-01E