YOKOGAWA WT500 User Manual page 93

3.16 Switching the Display
Explanation
Power measurement
(numeric display)
(Numeric)
Waveform display
(Wave)
Trend display
(Trend)
Bar graph display
(Bar)
Vector display
(Vector)
3-32
On the WT500, you can choose from the following kinds of displays.
Display Mode
Note
When waveforms are displayed, the measurement mode indicated on the screen is Normal
Mode (Trg). For details, see section 7.1.
Without the harmonic
measurement option
For operating instructions,
see chapter 5.
For an explanation of the
features, see section 2.4.
For operating instructions, see chapter 7.
For an explanation of the features, see section 2.7.
For operating instructions, see chapter 8.
For an explanation of the features, see section 2.8.
Bar graph display is
not possible.
Vector display is
not possible.
With the Harmonic
Measurement Option
For operating instructions,
see chapter 6.
For an explanation of the
features, see section 2.4.
For operating instructions,
see chapter 6.
For an explanation of the
features, see section 2.8.
For operating instructions,
see chapter 6.
For an explanation of the
features, see section 2.8.
IM 760201-01E