YOKOGAWA WT500 User Manual page 277

IM 760201-01E
TCP/IP Settings for Connecting over a Network
When connecting the WT500 to a network, set the TCP/IP settings as shown below
depending on whether the DHCP server and DNS server are available.
DHCP
IP address
Subnet mask
Default gateway
DNS
Domain name
DNS server address
Domain suffix
* In a network that supports DHCP, these values can be assigned automatically. For details,
consult your network administrator.
TCP/IP Configuration Example for Connecting the WT500 to a PC through
an Independent Ethernet Network
The table below shows and example of WT500 TCP/IP settings. Follow this example
when setting the PC's TCP/IP settings according to the procedure described later.
DHCP
IP address
Subnet mask
Default gateway
DNS
11.3 Configuring TCP/IP Settings
DHCP Server Is Available DHCP Server Is Not Available
ON OFF
Set manually (supplied
by your network administrator)
Does not need to be set
Set manually (check
(Automatically set by the
with your network administrator)
DHCP server)
Set manually (check
with your network administrator)
DNS Server Is Available DNS Server Is Not Available
ON OFF
Set manually* Does not need to be set
Set manually* Does not need to be set
Set manually* Does not need to be set
OFF
192.168.21.127
255.255.255.0
0.0.0.0
OFF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
App
Index
11-9