Henny Penny 500 Technical Manual page 37

1-6. INFORMATION MODE
DETAILS
305
Press and the next latest power-up date is shown. Up
to 10 power-ups (2B to 2K) can be stored in the P-LOG section.
Press to continue onto the heat-up log.
3. HEAT-UP'S
Press and "3A. (date & time) *NOW*
is the present date and time.
Press and the latest heat-up is shown, along with heat-up rate,
ex: "3B. MAY-22, 8:37A
rate (degrees/second) the controller recorded during the shown
time frame.
Press and the next latest heat-up is shown. Up to 10 heat-ups
(3B to 3K) can be stored in the HEAT-UP log.
Press to continue onto the COOK DATA.
4. COOK DATA
Press to step through the following data:
FUNCTION
Time of day last Cook Cycle was started
Product (last product cooked)
Ready? (was fryer ready before start?)
Drop detect status
Drop adjust (real time seconds)
Cook time adj (clock adjust)
Actual elapsed cook time (real seconds)
Stopped: time remaining, or secs past done
Slow cook for this cycle?
Frozen or overload? (bad batch)
Avg temp during Cook Cycle
Max voltage during Cook Cycle
Min voltage during Cook Cycle
Max amps during Cook Cycle
Min amps during Cook Cycle
Press to continue onto today's data log.
shows in display. This
1.25". The heat rate is the maximum
DISPLAY EXAMPLE
4A. STARTED 10.25A
4B. PRODUCT -1-
4C. READY?
4D. DETECT
4E. DROP ADJ T-14
4F. CK TM ADJ -13
4G. ACT TIME 4:50
4H. STOP DONE+2
4I. SLOW?
4J. FRZ/OVL? NO
4K. AVG TMP 317°F
4L. MAX VOLT 99%
4M. MIN VOLT 97%
4N. MAX AMPS 35
4O. MIN AMPS 34
Model 500/600
YES
/ T-14
\
NO
1-33