Henny Penny 500 Technical Manual page 21

Model 500/600
1-5. DIAGNOSTIC MODE D 1: Color Adjustment
This step lets the user make slight adjustments to the product color.
DETAILS (Continued)
The first step of this item asks "IS PRODUCT COLOR OK?"
If product color is okay and no change is desired press or
to move on to the next item, or press to exit Diagnostic Mode.
If a change is desired, press (i.e. color is not okay). The
controller shows "ADJUST DARKNESS", then displays the
darkness control slider:
" LT - - - - - + - - - - - DK"
A blinking asterisk (*) indicates the current position. and
are used to adjust the darkness setting.
To make the product darker, press to move the blinking "
* " toward the DK (darker) side.
To make the product lighter, press to move the blinking "
* " toward the LT (lighter) side.
When done adjusting, press to exit and return to normal
operating mode.
Any temperature adjustment activated by the color adjustment
feature will be reflected in the normal setpoint display as part of
the offset from the basic product cook temperature. To view the
present regulating temperature, press twice.
In the example, "SETPT = 315°F + 6" the product cook
temperature is 315°F and has an additional offset of 6°F to
compensate for the age of the oil, how long the fryer sits idle, and
any color adjustments.
305 1-17