Henny Penny 500 Technical Manual page 28

1-5. DIAGNOSTIC MODE
DETAILS (Continued)
1-24
Otherwise, if one or more cook products have generated a slow
cook warning more than 5% of the time, but four or more low
voltage or slow heat-up warnings (any combination) have been
generated today, then the report is as follows:
"D5: SOME SLOW"
"D5: COOKS TODAY"
"D5: MAYBE DUE TO"
"D5: VOLTAGE OR"
"D5: COIL PROBLEMS"
Such a report is saying the slow cooking may be the result of low
voltage (which significantly reduces heat capacity) or the result
of other problems with the heating system. In this case, the slow
cook problems might not have anything to do with user error.
Otherwise, the slow cooking is generally attributed to user error:
cooking too much product in one load, cooking frozen product (in
the pressure fryer) when it should be fresh, or cooking before the
Ready light illuminates, etc.
An individual "XXXXX IS COOKING SLOWLY TODAY"
item is generated for each product that has had more than 5% slow
cook warnings today. This report item is triggered based solely
on the number of slow cooks for that product, whether those slow
cooks are due to voltage or heating problems, or due to cooking
before ready, cooking too much, or cooking frozen product.
"D5: "FILET"
"D5: COOKING SLOW"
"D5: TODAY"
(Press )
If any of the slow cooks for this product are suspected as being
due user error, a second, "bad batch" report is generated for the
product.
"D5: "NUG-STRP"
"D5: COOKING SLOW"
"D5: TODAY"
(Press )
Model 500/600
( Product Name )
( Product Name )
report
305