Henny Penny 500 Technical Manual page 31

1-5. DIAGNOSTIC MODE
DETAILS (Continued)
305
The number of Stopped Too Soon cycles for this batch of peanut
oil is reported next. Note that this value does not yet include the
Cook Cycles from today.
"D7: BEFORE TODAY "
"D7: 3% OF LOADS"
"D7: WERE STOPPED"
"D7: TOO SOON"
"D7: ON THIS OIL"
(Press )
Finally, the controller identifies percentage of Stopped Too Soon
Cycles for the previous batch of peanut oil:
"D7: LAST OIL"
"D7: 5% OF LOADS"
"D7: WERE STOPPED"
"D7: TOO SOON"
D 8: "Beeped *DONE* Too Long" Report
Diagnostic Report section 8 reveals how many Cook Cycles
beeped "*DONE*" for more than 20 seconds before the user
pressed the timer button to stop the cycle. This is strictly a user
error.
The controller cannot detect when the product is actually removed
from the fryer. It only identifies how long the controller beeped
"*DONE*" before the user pressed
The first item displays the percent of today's Cook Cycles that
beeped "*DONE*" for more than 20 seconds before the user
pressed to stop it. All products are grouped into one count.
"D8: 10% OF LOADS"
"D8: BEEPED 'DONE'"
"D8: TOO LONG"
"D8: TODAY"
(Press )
Model 500/600
to stop the alarm.
1-27