Henny Penny 500 Technical Manual page 204

D
A
C
Figure 9
A C-Clip Retainer
B Spacers
C Latch Spring
D Latch Pin
Rev. C
December 2016
Latch Spring Inspection
Make sure the latch spring and all of its
components (latch spring, latch pin, spacers,
and C-clip retainer) are not broken, not missing
and installed correctly. If any components are
broken, damaged, missing or installed
incorrectly, this fryer would need to be taken
out of service until which time the components
can be replaced and installed correctly. The
latch spring is installed correctly if the label
"Front this side" is mounted to the front of the
B
latch (highlighted in figure 9).
Inspection 22
Rev. C