Henny Penny 500 Technical Manual page 24

1-5. DIAGNOSTIC MODE
DETAILS (Continued)
1-20
"D3: ARE OTHER"
"D3: FRYERS"
"D3: HAVING THIS"
"D3: PROBLEM"
"D3: TODAY?"
Press or
If is pressed (other fryers are having this problem):
"D3: FACILITY"
"D3: OR UTILITY"
"D3: PROBLEM"
If is pressed (other fryers are not having this problem):
"D3: CHECK CORD,"
"D3: WIRING,"
"D3: AND BREAKER"
In either case, press
Voltage Report for Present Batch of Peanut Oil
This report for the present batch of oil does not include data from
the today. It includes data for all days on the present batch of oil
before today.
For example, if low voltage warnings started appearing today but
had not been displayed before, the previous item might report
LOW VOLTAGE WARNINGS TODAY"
"VOLTAGE OK SINCE LAST OIL
If no low voltage warnings have been detected before today for the
present batch of oil, the controller shows:
"D3: VOLTAGE OK"
"D3: SINCE LAST"
"D3: OIL CHANGE"
.
to move on to the next step.
while this step reports
CHANGE".
Model 500/600
"3
305